PRO ETCH SERIES
This is a medium capacity range of etching/developing/rinsing machines. Capable of processing work 650mm wide by any length they are the ideal compromise between high capacity and price. They come with their own stands (not shown) custom built to match conveyor height of existing machinery. Capable of etching brass, copper and stainless steel with ease.
Specifications
Conveyor width : 650mm
Conveyor Drive : 1 to 1 polypropylene gear drive system
Conveyor control : DC shunt motor with digital speed control
Pump : 1.1 Kw glandless submersible unit, with rigid short stem titanium shaft
Filter : Lift out filter on input side of pump
Heating : 3 Kw titanium sheath element
Temperature control : Digital readout electronic thermostat
Spray banks : Top and bottom spray banks with throttle valves Close pitch narrow angle V jets
Carryover gap : 4 sets of squeegee rollers to prevent solution carryover
Mains rinse : Water in, top and bottom sprays, overflow to waste
Dimensions : Length 1200mm x Width 950mm x Ht 1270mm, conveyor ht.1mtr
Services : 3 phase, 40mm drain, 1/2" water in.
A medium volume production machine with top and bottom sprays to allow etching from either or both sides. The longer etch chamber enables faster etch times. Widely used for chemical etching of metals as well as volume production of Printed Circuits. Over 200 machines sold world-wide. It can be as shown or with a 24" feed in or exit conveyor or with a catch tray.
From £12,330 / $18,500
The Masteretch range of machines are renowned throughout the world for their good value. Masteretch ETCHING MACHINES ARE USED FOR ETCHING BRASS COPPER AND STAINLESS STEEL. ETCHING MACHINES, RINSING MACHINES AND DEVELOPING MACHINES CAN BE CUSTOMISED TO THE CLIENTS REQUIREMENTS. THE ETCHING PROCESS FOR METAL INVOLVES FERRIC CHLORIDE. ETCHING STAINLESS STEEL IS EASILY DONE WITH MASTERETCH ETCHING MACHINES.